Click image to view full size image
- Features:
- Automatic switching of monitor when gear is shifted intreverse
- Built-in two camera input
- Glass filter: built-in
- Sunshineld: (push through type) built-in
- Input voltage: 10 to 32V DC
- Monitor equippped with day/night selector switch for brightnesscompensation.
- Selector switch for normal and reverse image.
- Monitor:
- Input voltage: 11 to 32V DC (negative ground)
- Power consumption: 10.5W???12V DC with Camera
- Output voltage: 12V DC (connect camera)
- Video input signal: built-in two camera video switch
- Picture tube: 5.7 inches (CRT)
- Phosphor type: green (military-type)
- Deflection angle: 70°
- Scan frequencies: (H)15.75kHz(V)60Hz
- Picture resolution: 500TV lines
- Cabinet material: high impact plastic
- Shock: 6.8G
- Operating temperature: -22F to 158 deg. F
- Storage temperature: -50F to 160 deg. F
- Camera: (camera is mounted in a waterproof die cast housing):
- Input voltage: 12V DC (Powered by the monitor)
- Image sensor: B/W CMOS
- Lens: 3.6mm (optional)
- Scanning system: 2:1 interlace
- Resolution: 380 TV lines
- Minimum illumination: 0.5Lux or better(0 Lux-IR LEDs on)
- Video signal output: 1.0Vp-p 75ohm
- Power consumption: 200mW
- Water resistance: IP66
- Camera & bracket weight: 250g
- Operating temperature: -50 to 160 deg. F
Rear View Mirror Monitor (GW2108)
